Filter
Top Products
112
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
• IGMP Snooping Querier VLAN Status
IGMP Snooping Querier Configuration
Use this screen to enable or disable the IGMP Snooping Querier feature, specify the IP
address of the router to perform the querying, and configure the related parameters.
To configure IGMP Snooping Querier settings:
1. Select Switching
Multicast IGMP Snooping Querier Querier Configuration.
The following screen displays:
2. Next to the Querier Admin Mode, enable or disable the administrative mode for IGMP
snooping querier.
3. In the Snooping Querier
Address field, specify the IP address to be used as the source
address in periodic IGMP queries.
This address is used when no address is configured on the VLAN on which the query is
being sent.
4. In the IGMP V
ersion field, specify the IGMP protocol version used in periodic IGMP
queries.
Only version 2 is supported.
5. In the Query Interval field, specify the time interval in seconds between periodic queries
sent by the snooping querier
.
The query interval must be in the range of 1–1800 seconds. The default value is 60.