Filter
Top Products
54
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
To configure SNMPv3 settings for the user account:
1. Select System SNMP SNMP V3 User Configuration.
The following screen displays:
2. Next to Authentication Protocol, select the SNMPv3 Authentication Protocol setting for the
selected user account. The valid authentication protocols are None, MD5, or SHA.
• None.
The user is unable to access the SNMP data from an SNMP browser.
• MD5 or SHA.
The user login password is used as SNMPv3 authentication password,
and you must therefore specify a password. The password must be eight characters
in length.
3. Next to Encryption Protocol, select whether to encrypt SNMPv3 packets transmitted by the
switch.
• None. Do not encrypt the contents of SNMPv3 packets transmitted from the switch.
• DES. Encrypt SNMPv3 packets using the DES encryption protocol.
4. If you selected DES for the Encryption Protocol, enter the SNMPv3 encryption key in the
Encryption Key field. Otherwise, this field is ignored. V
alid keys are 0–15 characters long.
5. Click APPL
Y.
Configuration changes take effect immediately.