NETGEAR GS728TP Network Router User Manual


 
79
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
4. Click the box below each port to include the port in the LAG.
The following screen shows an example of how to configure LAG1 with ports g1–g4 as
members.
5. Click APPLY to send the updated configuration to the switch.
Configuration changes take effect immediately.
6. T
o view the ports that are members of the selected LAG, click the CURRENT MEMBERS
button.
LACP Configuration
To configure LACP:
1. Select Switching
LAG Advanced LACP Configuration.
The following screen displays:
2. In the LACP System Priority field, specify the device’s link aggregation priority relative to the
devices at the other ends of the links on which link aggregation is enabled.
A higher value indicates a lower priority. You can change the value of the parameter
globally by specifying a priority from 1 to 65535.
The default value is 32768.