Filter
Top Products
52
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
2. Click APPLY.
Configuration changes take effect immediately.
Trap Flags
Use the Trap Flags screen to enable or disable traps the switch can send to an SNMP
manager. When the condition identified by an active trap encounters the switch, a trap
message is sent to any enabled SNMP trap receivers, and a message is written to the trap
log.
To configure the trap flags:
1. Select System
SNMP SNMP V1/V2 Trap Flags.
The following screen displays:
2. From the All field, globally enable or disable activation of all traps by selecting the
corresponding button.
The factory default is Enable.
3. From the Authentication field, enable or disable activation of authentication failure traps by
selecting the corresponding button.
The factory default is Enable.
4. Click APPL
Y.
Configuration changes take effect immediately.