Filter
Top Products
228
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Factory Default
Use the Factory Default screen to reset the system configuration to the factory default values.
Note: If you reset the switch to the default configuration, the IP address is
reset to 192.168.0.239, and the DHCP client is enabled. If you loose
network connectivity after you reset the switch to the factory
defaults, see Connect the Switch to the Network .
To reset the switch to the factory default settings:
1. Select Maintenance
Reset Factory Default.
The following screen displays:
2. Select the check box.
3. Click APPL
Y.
The switch resets immediately.