NETGEAR GS728TP Network Router User Manual


 
38
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
The Dynamic Host Configuration table shows host name-to-IP address entries that the switch
has learned. Table 6 describes the dynamic host fields.
Table 6. Dynamic Host Configuration table fields
Field Description
Host Lists the host name you assign to the specified IP address.
Type The type of the dynamic entry.
IPv4/IPv6 Address Lists the IP address associated with the host name.
Click CLEAR to delete dynamic host entries. The table repopulates with entries as they are
learned.
Green Ethernet Configuration
The Green Ethernet features allow the switch to reduce power consumption on a per-port
basis. Each switch can support one or more of the following features:
Auto Power Down Mode. When the Auto Power Down mode is enabled and the port link
is down, the physical layer (PHY) automatically shuts down for a short period and wakes
up to check link pulses. This mode reduces power consumption on the port when no link
partner is present.
Short Cable Mode. With Short Cable mode enabled, the PHY goes into low-power mode
when the cable length is less than a certain limit.
Energy Efficient Ethernet (EEE) Mode. EEE enables ports to enter a low-power mode
to reduce power consumption during periods of low link utilization. EEE is defined by
IEEE 802.3az. EEE enables both the send and receive sides of the link to disable some
functionality for power savings when the link is lightly loaded.