![](http://pdfasset.owneriq.net/b/6e/b6e8b922-5877-45f8-bb72-b1d5f6f82015/b6e8b922-5877-45f8-bb72-b1d5f6f82015-bgbd.png)
189
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
• ACL Based on Source IPv6 L4 Port. Creates an ACL based on the source IPv6
layer 4 port number.
3. Configure the settings in the following table, based on the selection in the ACL Type list:
Note: The Rule ID, Action, and Match Every fields appear for all ACL
types. The remaining two fields vary according to the selected ACL
type.
• In the Rule ID field, enter a number that is used to identify the rule. The valid range is
1 - 10.
• In the Action field, specify what action must be taken if a packet matches the rule's
criteria. The choices are Permit or Deny.
• In the Match Every field, specify True or False.
• In the remaining two fields, specify data according to Table 25.
Table 25. ACL fields according to selected ACL type.
ACL Based on Fields
Destination MAC • Destination MAC. Specify the destination MAC address to compare against an
ethernet frame. The valid format is (xx:xx:xx:xx:xx:xx). The BPDU keyword
might be specified using a destination MAC address of 01:80:C2:xx:xx:xx.
• Destination MAC Mask. specify the destination MAC address mask specifying
which bits in the destination MAC to compare against an ethernet frame. The
valid format is (xx:xx:xx:xx:xx:xx). The BPDU keyword might be specified using
a destination MAC mask of 00:00:00:ff:ff:ff.
Source MAC • Source MAC. Specify the source MAC address to compare against an ethernet
frame. The valid format is (xx:xx:xx:xx:xx:xx).
• Source MAC Mask. Specify the source MAC address mask specifying which
bits in the source MAC to compare against an ethernet frame. Valid format is
(xx:xx:xx:xx:xx:xx).
Destination IPv4 • Destination IP Address. Specify the destination IP address.
• Destination IP Mask. Specify the destination IP address mask.
Source IPv4 • Source IP Address. Specify the source IP address.
• Source IP Mask. Specify the source IP address mask.
Destination IPv6 • Destination Prefix. Specify the destination prefix.
• Destination Prefix Length. Specify the destination prefix length.
Source IPv6 • Source Prefix. Specify the source destination prefix.
• Source Prefix Length. Specify the source prefix length.
Destination IPv4 L4
Port
• Destination L4 port (protocol). Specify the destination IPv4 L4 port protocol.
• Destination L4 port (value). Specify the destination IPv4 L4 port value.