Filter
Top Products
Routing Commands
230
ProSafe M4100 and M7100 Managed Switches
no ip default-gateway
Use this command to remove the default gateway address from the configuration.
Format no ip default-gateway <ipaddr>
Mode
release dhcp
Use this command to force the DHCPv4 client to release the leased address from the
specified interface.
Format release dhcp <slot/port>
Mode
renew dhcp
Use this command to force the DHCPv4 client to immediately renew an IPv4 address lease
on the specified interface.
Format renew dhcp {<slot/port>|network-port}
Mode
Note: This command can be used on in-band ports as well as network
(out-of-band) port.
show dhcp lease
Use this command to display a list of IPv4 addresses currently leased from a DHCP server
on a specific in-band interface or all in-band interfaces. This command does not apply to
service or network ports.
Format show dhcp lease [interface <slot/port>]
Mode
Interface Config
Privileged EXEC
Privileged EXEC
Privileged EXEC
Term Definition
IP address,
Subnet mask
The IP address and network mask leased from the DHCP server.
DHCP Lease
server
The IPv4 address of the DHCP server that leased the address.
State
State of the DHCPv4 Client on this interface.
DHCP transaction
ID
The transaction ID of the DHCPv4 Client.