Filter
Top Products
DiffServ Admin
Mode
Quality of Service (QoS) Commands
472
ProSafe M4100 and M7100 Managed Switches
The following information is repeated for interface and direction (only those interfaces
configured with an attached policy are shown):
Interface
Direction
OperStatus
Policy Name
show policy-map interface
This command displays policy-oriented statistics information for the specified interface and
direction. The <slot/port> parameter specifies a valid interface for the system.
Note: This command is only allowed while the DiffServ administrative
mode is enabled.
The following information is repeated for each class instance within this policy:
Class Name
In Discarded
Packets
Term Definition
The current setting of the DiffServ administrative mode. An attached policy is only active
on an interface while DiffServ is in an enabled mode.
Term Definition
Valid slot and port number separated by forward slashes.
The traffic direction of this interface service.
The current operational status of this DiffServ service interface.
The name of the policy attached to the interface in the indicated direction.
Format show policy-map interface <slot/port> [in | out]
Mode
Privileged EXEC
Term Definition
Interface
Valid slot and port number separated by forward slashes.
Direction
The traffic direction of this interface service.
Operational
Status
The current operational status of this DiffServ service interface.
Policy Name
The name of the policy attached to the interface in the indicated direction.
Term Definition
The name of this class instance.
A count of the packets discarded for this class instance for any reason due to DiffServ
treatment of the traf
fic class.