Filter
Top Products
Routing Commands
281
ProSafe M4100 and M7100 Managed Switches
no ip ospf priority
This command sets the default OSPF priority for the specified router interface.
Format no ip ospf priority
Mode
ip ospf retransmit-interval
This command sets the OSPF retransmit Interval for the specified interface. The retransmit
interval is specified in seconds. The value for <seconds> is the number of seconds between
link-state advertisement retransmissions for adjacencies belonging to this router interface.
This value is also used when retransmitting database description and link-state request
packets. Valid values range from 0 to 3600 (1 hour).
Default
Format ip ospf retransmit-interval <0-3600>
Mode
no ip ospf retransmit-interval
This command sets the default OSPF retransmit Interval for the specified interface.
Format no ip ospf retransmit-interval
Mode
ip ospf transmit-delay
This command sets the OSPF Transit Delay for the specified interface. The transmit delay is
specified in seconds. In addition, it sets the estimated number of seconds it takes to transmit
a link state update packet over this interface. Valid values for <seconds> range from 1 to
3600 (1 hour).
Default
Format ip ospf transmit-delay <1-3600>
Mode
no ip ospf transmit-delay
This command sets the default OSPF Transit Delay for the specified interface.
Format no ip ospf transmit-delay
Mode
Interface Config
5
Interface Config
Interface Config
1
Interface Config
Interface Config