Filter
Top Products
Routing Commands
296
ProSafe M4100 and M7100 Managed Switches
The information below will only be displayed if OSPF is enabled.
OSPF Interface
Type
State
Designated
Router
Backup
Designated
Router
Number of Link
Events
Local Link LSAs
Local Link LSA
Checksum
show ip ospf interface brief
This command displays brief information for the IFO object or virtual interface tables.
Format show ip ospf interface brief
Mode
• Privileged EXEC
• User EXEC
Metric Cost
The cost of the OSPF interface.
Passive Status
Shows whether the interface is passive or not.
OSPF
MTU-ignore
Indicates whether to ignore MTU mismatches in database descriptor packets sent from
neighboring routers.
Term Definition
Broadcast LANs, such as Ethernet and IEEE 802.5, take the value broadcast. The
OSPF Interface Type will be 'broadcast'.
The OSPF Interface States are: down, loopback, waiting, point-to-point, designated
router
, and backup designated router.
The router ID representing the designated router.
The router ID representing the backup designated router.
The number of link events.
The number of Link Local Opaque LSAs in the link-state database.
The sum of LS Checksums of Link Local Opaque LSAs in the link-state database.
Term Definition
Interface
Valid slot and port number separated by forward slashes.
OSPF Admin
Mode
States whether OSPF is enabled or disabled on a router interface.
OSPF Area ID
The OSPF Area Id for the specified interface.
Router Priority
A number representing the OSPF Priority for the specified interface.
Hello Interval
A number representing the OSPF Hello Interval for the specified interface.
Dead Interval
A number representing the OSPF Dead Interval for the specified interface.
Term Definition