Filter
Top Products
Quality of Service (QoS) Commands
494
ProSafe M4100 and M7100 Managed Switches
Interface Auto VoIP Operational Status
Mode
--------- -------------- ------------------
0/1 Disabled Down
0/2 Disabled Down
0/3 Disabled Down
0/4 Disabled Down
Example: The following shows an example of a CLI display output for the command.
(Netgear Switch)# show auto-voip oui-based interface all
VoIP VLAN Id................................... 2
Priority....................................... 7
Interface Auto VoIP Operational Status
Mode
--------- -------------- ------------------
0/1 Disabled Down
0/2 Disabled Down
0/3 Disabled Down
0/4 Disabled Down
0/5 Disabled Down
show auto-voip oui-table
This command lists all of the configured OUIs.
Format show auto-voip oui-table
Mode
• Privileged EXEC
• User EXEC
OUI
Status
OUI Description
Example: show auto-voip oui-table
OUI Status Description
--------- ---------- ---------
00:01:E3 Default SIEMENS
00:03:6B Default CISCO1
00:01:01 Configured VoIP phone
iSCSI Commands
The tasks involved in providing automated QoS preferential treatment of iSCSI flows can be
divided into the following categories:
Term Definition
OUI of the source MAC address
Default or Configured entry.
Description of the OUI