Filter
Top Products
Switching Commands
78
ProSafe M4100 and M7100 Managed Switches
clear dot1x statistics
This command resets the 802.1x statistics for the specified port or for all ports.
Format clear dot1x statistics {<slot/port> | all}
Mode
clear radius statistics
This command is used to clear all RADIUS statistics.
Format clear radius statistics
Mode
dot1x eapolflood
Use this command to enable EAPOL flood support on the switch.
Format
Mode
Default
no dot1x eapolflood
This command disables EAPOL flooding on the switch.
Format no dot1x eapolflood
Mode
dot1x guest-vlan
This command configures VLAN as guest vlan on a per port basis. The command specifies
an active VLAN as an IEEE 802.1x guest VLAN. The range is 1 to the maximum VLAN ID
supported by the platform.
Default
Format dot1x guest-vlan <vlan-id>
Mode
Privileged EXEC
Privileged EXEC
dot1x eapolflood
Global Config
Disabled
Global Config
disabled
Interface Config