Filter
Top Products
Routing Commands
275
ProSafe M4100 and M7100 Managed Switches
default-information originate (OSPF)
This command is used to control the advertisement of default routes.
Default
• metric—unspecified
• type—2
Format default-information originate [always] [metric <0-16777214>]
[metric-type {1 | 2}]
Mode
no default-information originate (OSPF)
This command is used to control the advertisement of default routes.
Format no default-information originate [metric] [metric-type]
Mode
default-metric (OSPF)
This command is used to set a default for the metric of distributed routes.
Format default-metric <1-16777214>
Mode
no default-metric (OSPF)
This command is used to set a default for the metric of distributed routes.
Format no default-metric
Mode
distance ospf (OSPF)
This command sets the route preference value of OSPF in the router. Lower route preference
values are preferred when determining the best route. The type of OSPF route can be
intra, inter, or external. All the external type routes are given the same preference
value. The range of <preference> value is 1–255.
Format clear ip ospf stub-router
Mode
Privileged EXEC
Router OSPF Config
Router OSPF Config
Router OSPF Config
Router OSPF Config
Default
110