Filter
Top Products
Management Commands
672
ProSafe M4100 and M7100 Managed Switches
station, and will use that machine's IP address for the client IP address. A value of 0.0.0.0 will
allow access from any IP address. The name is the applicable community name.
Default
Format snmp-server community ipmask <ipmask> <name>
Mode
no snmp-server community ipmask
Use this command to set a client IP mask for an SNMP community to 0.0.0.0. The name is
the applicable community name.
The community name might be up to 16 alphanumeric
characters.
Format no snmp-server community ipmask <name>
Mode
snmp-server community mode
Use this command to activate an SNMP community. If a community is enabled, an SNMP
manager associated with this community manages the switch according to its access right. If
the community is disabled, no SNMP requests using this community are accepted. In this
case the SNMP manager associated with this community cannot manage the switch until the
Status is changed back to Enable.
Default
• private and public communities - enabled
• other four - disabled
Format snmp-server community mode <name>
Mode
no snmp-server community mode
Use this command to deactivate an SNMP community. If the community is disabled, no
SNMP requests using this community are accepted. In this case the SNMP manager
associated with this community cannot manage the switch until the Status is changed back to
Enable.
Format no snmp-server community mode <name>
Mode
0.0.0.0
Global Config
Global Config
Global Config
Global Config