NETGEAR M4100-50G-POE+ Switch User Manual


 
Routing Commands
269
ProSafe M4100 and M7100 Managed Switches
no area stub
This command deletes a stub area for the specified area ID.
Format no area <areaid> stub
Mode
area stub no-summary (OSPF)
This command configures the Summary LSA mode for the stub area identified by <areaid>.
Use this command to prevent LSA Summaries from being sent.
Default
Format area <areaid> stub no-summary
Mode
no area stub no-summary
This command configures the default Summary LSA mode for the stub area identified by
<areaid>.
Format no area <areaid> stub no-summary
Mode
area virtual-link (OSPF)
This command creates the OSPF virtual interface for the specified <areaid> and
<neighbor>. The <neighbor> parameter is the Router ID of the neighbor.
Format area <areaid> virtual-link <neighbor>
Mode
no area virtual-link
This command deletes the OSPF virtual interface from the given interface, identified by
<areaid> and <neighbor>. The <neighbor> parameter is the Router ID of the
neighbor
.
Format no area <areaid> virtual-link <neighbor>
Mode
area virtual-link authentication
This command configures the authentication type and key for the OSPF virtual interface
identified by <areaid> and <neighbor>. The <neighbor> parameter is the Router ID of
the neighbor. The value for <type> is either none, simple, or encrypt. The [key] is
Router OSPF Config
disabled
Router OSPF Config
Router OSPF Config
Router OSPF Config
Router OSPF Config