Filter
Top Products
Switching Commands
58
ProSafe M4100 and M7100 Managed Switches
show vlan <vlanid>
This command displays detailed information, including interface information, for a specific
VLAN. The ID is a valid VLAN identification number.
Format show vlan <vlanid>
Mode
• Privileged EXEC
• User EXEC
VLAN ID
VLAN Name
VLAN Type
Interface
Current
• Include -
This port is always a member of this VLAN. This is equivalent to registration
fixed in the IEEE 802.1Q standard.
• Exclude -
This port is never a member of this VLAN. This is equivalent to registration
forbidden in the IEEE 802.1Q standard.
• Autodetect -
To allow the port to be dynamically registered in this VLAN via GVRP.
The port will not participate in this VLAN unless a join request is received on this port.
This is equivalent to registration normal in the IEEE 802.1Q standard.
Configured
• Include -
This port is always a member of this VLAN. This is equivalent to registration
fixed in the IEEE 802.1Q standard.
• Exclude -
This port is never a member of this VLAN. This is equivalent to registration
forbidden in the IEEE 802.1Q standard.
• Autodetect -
To allow the port to be dynamically registered in this VLAN via GVRP.
The port will not participate in this VLAN unless a join request is received on this port.
This is equivalent to registration normal in the IEEE 802.1Q standard.
Tagging
• T
agged - Transmit traffic for this VLAN as tagged frames.
• Untagged -
Transmit traffic for this VLAN as untagged frames.
Term Definition
A VLAN Identifier (VID) is associated with each VLAN. The range of the VLAN ID is
1–4093.
A string associated with this VLAN as a convenience. It can be up to 32 alphanumeric
characters long, including blanks.
The default is blank. VLAN ID 1 always has a name of
“Default.” This field is optional.
Type of VLAN, which can be Default (VLAN ID = 1) or static (one that is configured and
permanently defined), or Dynamic (one that is created by GVRP registration).
Valid slot and port number separated by forward slashes. It is possible to set the
parameters for all ports by using the selectors on the top line.
The degree of participation of this port in this VLAN. The permissible values are:
The configured degree of participation of this port in this VLAN. The permissible values
are:
The tagging behavior for this port in this VLAN.