Filter
Top Products
IPv6 Multicast Commands
428
ProSafe M4100 and M7100 Managed Switches
no ipv6 pim bsr-candidate
Use this command to disable the router to announce its candidacy as a bootstrap router
(BSR).
Format no ipv6 pim bsr-candidate interface [<slot/port> | vlan <1-4093>]
[hash-mask-length] [priority]
Mode
ipv6 pim dr-priority
Use this command to set the priority value for which a router is elected as the designated
router (DR).
Default
Format ipv6 pim dr-priority <0-2147483647>
Mode
no ipv6 pim dr-priority
Use this command to disable the interface from being the BSR border.
Format no ipv6 pim dr-priority
Mode
Format ipv6 pim bsr-candidate interface [<slot/port> | vlan <1-4093>]
[hash-mask-length] [priority] [interval interval]
Mode
hash-mask-length
priority
interval
Global Config
Parameters Description
Length of a mask (32 bits maximum) that is to be ANDed with the group address before
the hash function is called. All groups with the same seed hash correspond to the same
RP. For example, if this value was 24, only the first 24 bits of the group addresses
matter. This allows you to get one RP for multiple groups.
Priority of the candidate BSR. The range is an integer from 0 to 255. The BSR with the
larger priority is preferred. If the priority values are the same, the router with the larger
IP address is the BSR.
The default value is 0.
(Optional) Indicates the BSR candidate advertisement interval. The range is from 1 to
16,383 seconds.
The default value is 60 seconds.
Global Config
1
Interface Config
Interface Config