Filter
Top Products
Management Commands
686
ProSafe M4100 and M7100 Managed Switches
no radius server retransmit
Use this command to set the value of this global parameter to the default value.
Format no radius server retransmit
Mode
radius server timeout
Use this command to configure the global parameter for the RADIUS client that specifies the
timeout value (in seconds) after which a request must be retransmitted to the RADIUS server
if no response is received. The timeout value is an integer in the range of 1–30.
Default
Format radius server timeout <seconds>
Mode
retries
no radius server timeout
Use this command to set the timeout global parameter to the default value.
Format no radius server timeout
Mode
show radius
Use this command to display the values configured for the global parameters of the RADIUS
client.
Format show radius
Mode
Field Description
retries
The maximum number of transmission attempts in the range of 1–15.
Global Config
5
Global Config
Field Description
Maximum number of transmission attempts in the range <1-30>.
Global Config
Privileged EXEC