Filter
Top Products
Utility Commands
570
ProSafe M4100 and M7100 Managed Switches
period (for example, a3.4f.22.0c), colon (for example, a3:4f:22:0c), or white space (for
example, a3 4f 22 0c).
Default
Format option <code> {ascii string | hex <string1> [<string2>...<string8>]
| ip <address1> [<address2>...<address8>]}
Mode
no option
This command removes the DHCP Server options. The <code> parameter specifies the
DHCP option code.
Format no option <code>
Mode
ip dhcp excluded-address
This command specifies the IP addresses that a DHCP server should not assign to DHCP
clients. Low-address and high-address are valid IP addresses; each made up of four decimal
bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
Default
Format ip dhcp excluded-address <lowaddress> [highaddress]
Mode
no ip dhcp excluded-address
This command removes the excluded IP addresses for a DHCP client. Low-address and
high-address are valid IP addresses; each made up of four decimal bytes ranging from 0 to
255. IP address 0.0.0.0 is invalid.
Format no ip dhcp excluded-address <lowaddress> [highaddress]
Mode
ip dhcp ping packets
Use this command to specify the number, in a range from 2-10, of packets a DHCP server
sends to a pool address as part of a ping operation. By default the number of packets sent to
a pool address is 2, which is the smallest allowed number when sending packets. Setting the
number of packets to 0 disables this command.
none
DHCP Pool Config
DHCP Pool Config
none
Global Config
Global Config
Default
2