Filter
Top Products
Routing Commands
271
ProSafe M4100 and M7100 Managed Switches
area virtual-link hello-interval (OSPF)
This command configures the hello interval for the OSPF virtual interface on the virtual
interface identified by <areaid> and <neighbor>. The <neighbor> parameter is the
Router ID of the neighbor. The range for <seconds> is 1–65535.
Default
Format area <areaid> virtual-link <neighbor> hello-interval <1-65535>
Mode
no area virtual-link hello-interval
This command configures the default hello interval for the OSPF virtual interface on the
virtual interface identified by <areaid> and <neighbor>. The <neighbor> parameter is
the Router ID of the neighbor
.
Format no area <areaid> virtual-link <neighbor> hello-interval
Mode
area virtual-link retransmit-interval (OSPF)
This command configures the retransmit interval for the OSPF virtual interface on the virtual
interface identified by <areaid> and <neighbor>. The <neighbor> parameter is the
Router ID of the neighbor. The range for seconds is 0–3,600.
Default
Format area <areaid> virtual-link <neighbor> retransmit-interval <seconds>
Mode
no area virtual-link retransmit-interval
This command configures the default retransmit interval for the OSPF virtual interface on the
virtual interface identified by <areaid> and <neighbor>. The <neighbor> parameter is
the Router ID of the neighbor
.
Format no area <areaid> virtual-link <neighbor> retransmit-interval
Mode
10
Router OSPF Config
Router OSPF Config
5
Router OSPF Config
Router OSPF Config