Filter
Top Products
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
A-2 Default Settings and Technical Specifications
v1.1, November 2009
DHCP Client Disabled
Time Zone USA-Pacific
Time Zone Adjusted for Daylight Saving
Time
Disabled
SNMP Enabled, but Trap forwarding disabled
Spanning Tree Protocol Disabled
Secure Telnet Enabled
Wireless
Operating Mode Access Point
Access Point Name
netgearxxxxxx where xxxxxx are the last 6 digits of the
wireless access point MAC address.
Wireless Communication Enabled
11a/na Wireless Network Name (SSID) NETGEAR_11a
11 b/bg/ng Wireless Network Name
(SSID)
NETGEAR_11g
Broadcast Network Name SSID Enabled
Security Disabled
Transmission Speed Best
a
Country/Region Varies by region
80211.a Radio Frequency Channel Auto
80211.g Radio Frequency Channel Auto
Output Power
Full
Wireless Card Access List All wireless stations allowed
WMM Support Enabled
a. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary.
Network conditions and environmental factors, including volume of network traffic, building materials and
construction, and network overhead, lower actual data throughput rate.
Table A-1. Access Point Default Configuration Settings
Feature Description