Filter
Top Products
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
2-32 Basic Installation and Configuration
v1.1, November 2009
To configure a Security Profile:
1. From your Web browser, log in to the WNDAP350 using the default LAN address of
http://192.168.0.237, user name admin and password password, or use the LAN address and
password that you set up.
2. Under the Configuration tab, select
Security from the main menu, and then select either
Security Profile Settings for 802.11b/bg/ng or 802.11a/na. The screen for the Profile Settings
you selected displays as shown in Figure 2-15above.
3. Select the check box of the profile you want to modify and click Edit. The Security Profile
Configuration screen for the selected profile displays (see Figure 2-16).
4. Give your profile a meaningful name so that you can remember it later.
5. The Wireless Network Name (SSID) is set by default to identify it as NETGEAR_11g.
6. Enable or disable the Broadcast Wireless Network Name (SSID). It is enabled by default. (If it
is broadcast, it can be easily detected by other clients.)
7. From the Network Authentication pull-down menu, select the Network Authentication Type
you want to use for this profile:
• To configure WEP encryption for Open Systems or Shared Key, see “Configuring WEP”
on page 2-33.
Figure 2-16 Edit a security profile