Filter
Top Products
4-1
v1.1, November 2009
Chapter 4
Advanced Configuration
This chapter describes how to configure the advanced features of your ProSafe Dual Band
Wireless-N Access Point WNDAP350. The advanced configuration features are located under
various sub-menus under Configuration and provide the following functions:
• IP Settings. Using the wireless access point as a DHCP server for wireless clients (“IP
Settings for Wireless Clients).
• Hotspot settings. Enabling HTTP redirect (“Hotspot Settings).
• Wireless Settings: Configuring advanced wireless LAN parameters (“Configuring Advanced
Wireless Settings).
• Advanced QoS Settings: Configuring advanced QoS settings (“Configuring Advanced QoS
Settings)
• Access Point Settings: Enabling wireless bridge modes (“Enabling Wireless Bridging).
IP Settings for Wireless Clients
You can turn the WNDAP350 into a DHCP Server for wireless clients for both DHCP-enabled
wireless clients. The default advanced IP wireless settings usually work well. This feature is
intended for use by a systems administrator. By default, this feature is not enabled.
To use this wireless access point as a DHCP server:
1. From the main menu under Configuration, select IP, and then select DHCP Server Settings.
The DHCP Server Settings screen displays (see Figure 4-1).
2. DHCP Server is disabled by default. Select the Enable radio button to enable this wireless
access point as a DHCP server.