Filter
Top Products
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
Basic Installation and Configuration 2-7
v1.1, November 2009
– Untagged VLAN. Untagged VLANs do not cause the outbound traffic to be tagged with
the VLAN ID. Also, there can be only one Untagged VLAN. The default is Enable and set
to 1.
– Management VLAN. Management VLANs are used for managing traffic (Telnet, SNMP,
and HTTP) to and from the Access Point. Management VLANs also cause outbound
traffic to be tagged with this VLAN ID. However, if their VLAN ID is same as the
Untagged VLAN ID, then the outbound traffic is not tagged. There can be only one
Management VLAN.The default is 1.
8. Select Time from the left panel. The Time screen displays, as shown in Figure 2-4.
9. Enter the Time Settings for your area. See the online help or “Configuring Time Settings” on
page 2-8 for more information about how to configure the settings on this screen.
Figure 2-4 Time zone and system time related settings