Filter
Top Products
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
Index-5
v1.1, November 2009
reset button, using 5-4
rebooting
losing previous state 3-17
reception 2-2
redirect HTTP 4-3
redirect URL
hotspot settings 4-4
reduced inter frame spacing, support for 1-4
remote console
secure shell (SSH) 3-3
Telnet 3-3
request to send threshold 4-5
reset button 3-9
reset to factory defaults 3-9
retransmission 1-4
RIFS
wireless settings 4-6
RIFS (Reduced Interframe Space) transmission 4-8
roaming
multiple wireless access points 3-16
roaming on same subnet, support for 1-4
rogue AP detection
configure 3-17
import rogue AP list from file 3-18
support for 1-3
unknown AP list 3-18
rogue AP list 3-19
unknown AP list 3-19, 3-21
RTS 4-5
RTS threshold 4-7
RTS/CTS handshake, support for 1-4
S
secure Telnet CLI, support for 1-3
secure Telnet client 3-3
secure Telnet interface, using 3-3
security profile
VLAN ID 1-4, 2-33
security profile definition
authentication settings 2-25
broadcast wireless network name (SSID) 2-25
data encryption 2-26
security profile name 2-24
VLAN ID 2-27
wireless client security separation 2-27
wireless network name (SSID) 2-24
security profile settings
testing connectivity 2-22
security profile, support for 1-3
security profiles
about 2-23
security profiles, setting up 2-31
security profiloe
wireless client security separation 2-33
serial console port, connectors 1-10
Service Set Identifier (SSID)
max per radio mode 1-2
setup form 2-27
SNMP
enable SNMP 3-2
read-only community name 3-2
read-write community name 3-2
receive traps IP address 3-2
remote management 3-1
trap community name 3-2
trap port 3-2
SNMP (Simple Network Management Protocol ),
support 1-2
software upgrade 3-5
Spanning Tree Protocol
enabling 2-6
SSID 2-16, 2-18
hidden mode 1-3
SSID broadcast, disable 2-25
SSID match
verify connectivity 2-11
SSID, wireless network name 2-24
standards, supported 1-2
static IP address 5-3
default 2-5
statistics 3-14
subnet mask