Filter
Top Products
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
2-24 Basic Installation and Configuration
v1.1, November 2009
An overview of the information that is required to set up a Security Profile follows, including a
description of the Network Authentication choices that are available:
• Profile Definition. Configure the following settings:
• Security Profile Name. Use a name that makes it easy to recognize the profile, and to tell
profiles apart. (The default names are NETGEAR, NETGEAR-1, NETGEAR-2, and so
on.) You can enter a value of up to 32 alphanumeric characters.
• Wireless Network Name (SSID). This is the name of your wireless network. It is set to
the default name of NETGEAR_11a for 802.11a/na and NETGEAR_11g for 802.11b/bg/
ng.
Figure 2-13 Security Profile Settings
Note: Only the first profile is enabled by default. The rest of the profiles are disabled
and must be enabled if configured.