Filter
Top Products
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
4-6 Advanced Configuration
v1.1, November 2009
• Aggregation Length (1024-65535) (11ng): The aggregation length defines the size of
aggregated packets. Larger aggregation lengths may sometimes lead to better network
performance. The default is 65535.
• A-MPDU (11ng): Aggregated MAC Protocol Data Unit. Aggregates several MAC frames
into a single large frame to achieve higher throughput. The default is enabled.
• RIFS Transmission (11ng): Reduced Interframe Space. RIFS transmissions are shorter
than other interframe spaces, and if enabled allow transmission of successive frames at
different transmit powers. The default is disabled.
• DTIM Interval: The Delivery Traffic Indication Message. Specifies the data beacon rate
between 1 and 255. The default is 3.
• Preamble Type (11b/bg only): A long transmit preamble may provide a more reliable
connection or a slightly longer range. A short transmit preamble gives better performance.
The Auto settings automatically handles both long and short preambles. The default is
Auto.
• Antenna: Enable the internal or external antenna. The internal antenna is enabled by
default.
•802.11d: Enable this option to include support for "additional regulatory domains" that are
not in the current standard.
• Client Isolation: This option, when enabled, blocks communication between wireless
clients that are associated to different VAPs. The default is Disable.
• Max Wireless Clients: The number of wireless clients that can associate with the AP at
one time. The default is 63.
5. Click Apply to enable the Wireless Settings.
Configuring 802.11a/na Advanced Wireless Settings
To configure advanced Wireless Settings:
1. Under the Configuration tab, select Wireless.
2. From the sidebar, select Advanced, and then select Wireless Settings.