Filter
Top Products
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
Index-2
v1.1, November 2009
rate 3-16
SSID 3-16
state 3-16
status 3-16
type 3-16
wireless network name (SSID) 3-16
B
back off 1-4
Basic Service Set (BSS) 1-2
Basic Service Set Identifier (BSSID) 1-2
beacon generation, support for 1-4
beacon interval 4-5, 4-7
bridge
network authentication 2-25
bridge mode wireless station
wireless point to point bridge 4-10
wireless point-to-multi-point bridge 4-10
BSSID 3-16
C
Category 5 Ethernet cable 1-6
change password 3-10
channel auto
testing connectivity 2-22
channel auto selection 2-22
channel interference 2-22
channel spacing 2-3, 2-19
channel spacing, recommended 2-16
channel width 2-19
channel, auto
configuring channel/frequency 2-16
channel, default 2-16
CLI
command set 3-4
command line interface (CLI) 3-3
configuration file 3-6
backup or restore 3-7
country/region, configure 2-6
coverage 2-2
coverage area 1-1, 2-11
CSMA/CA 4-5, 4-7
CSMA/CD (Carrier Sense Multiple Access with
Collision Detection) 4-5, 4-7
CTS (Clear to Send) 4-5
D
data encryption settings
128 bits WEP 2-26
152 bits WEP 2-26
64 bits WEP 2-26
AES 2-26
none 2-26
TKIP 2-26
TKIP + AES 2-26
data rates 802.11a/na 2-19
data rates 802.11bgn 2-17
default access point name 2-6
default channel 2-16, 2-22
default gateway, configure 2-14
default IP address 2-5, 2-13
default password 2-5
default reset button 3-9
default SSID 2-11
default SSID 802.11a/n 2-24
default SSID 802.11b/g/n 2-24
default user name 2-5
default wireless access point name 2-11
DHCP
point-to-multi-point bridging 4-15
DHCP client
default setting 2-11
DHCP client, configure 2-13
DHCP client/server
support 1-2
DHCP server
configure 4-1
on LAN 2-13
on LAN, assigns IP address 2-11
distributed coordinated function, support for 1-4