Filter
Top Products
3 Configuration commands Relay commands
NN47928-107 103
client configuration is null if it requested its
server from DHCP, but it did not receive one
and/or it requested the user-provided server,
but no SNTP server had been specified.
gmt +|-offset Enter the GMT time zone offset in hours. The
default is 0. Specify this offset only if the client
devices cannot provide their offset. If the
appropriate offset is supplied by the clients, set
this parameter to 0.
Example The following example enables the SNTP relay function. By default, the
configuration source is auto; the SNTP relay uses the same SNTP server
configuration provided for the SNTP client. Also by default, the gmt
parameter is set to 0; the BSGX4e does not provide a time offset to the LAN
clients.
> config relay sntp settings enabled
Example The following example re-configures the SNTP relay function to use the
SNTP server at IP address 192.168.134.160. Relay SNTP is initially
enabled.
> config relay sntp settings no enabled
> config relay sntp settings source user server
192.168.134.160
> config relay sntp settings enabled
Related
commands
display relay sntp settings
show relay sntp settings
show relay sntp sessions
show system sntp