Filter
Top Products
Netflow commands 3 Configuration commands
80 NN47928-107
netflow filter
Use this command to configure the Netflow filter. By default, all traffic is
monitored with a default setting of any for all fields.
Syntax config netflow filter sourceport <port> destport <port> scrip
<ip address> dstip <ip address> tos <value> ipproto
[any|udp|tcp|icmp|esp|gre] ethproto [ip|arp|rarp] srcmac <mac
address> dstmac <mac address> interface <if>
Parameters sourceport port Enter the source port to monitor.
destport port Enter the destination port to monitor.
srcip ip address Enter the source IP address to monitor.
dstip ip address Enter the destination IP address to monitor.
tos value Enter the ToS tag value to monitor.
ipproto any|udp|tcp|icmp|esp|gre
Enter the IP protocol to monitor.
ethproto ip|arp|rarp|any
Enter the Ethernet protocol to monitor.
srcmac mac address Enter the source MAC address to monitor.
dstmac mac address Enter the destination MAC address to monitor.
interface if Enter the interface to monitor.
Example > config netflow filter srcip 10.0.1.100 tos 248
Related
commands
display netflow filter
show netflow filter
show netflow agent