Filter
Top Products
Voice Commands 3 Configuration commands
180 NN47928-107
voice jitterbuffer
Use this command to configure voice playout jitter buffer setting for the SIP
or MGCP gateway (User Agent).
Syntax config voice jitterbuffer mode [fixed|adaptive] maximum <ms>
nominal <ms> minimum <ms>
Parameters mode fixed|adaptive
Enter the jitter buffer type. The default is
adaptive.
maximum ms Enter the maximum delay introduced by the
jitter buffer, in milliseconds. This value is used
only if the mode is adaptive. The default value
is 120 ms.
nominal ms Enter the nominal delay introduced by the jitter
buffer, in milliseconds. The default is 40 ms.
minimum ms Enter the minimum delay introduced by the
jitter buffer, in milliseconds. This value is used
only if the mode is adaptive. The default value
is 20 ms.
Example > config voice jitterbuffer mode fixed nominal 60
Related
commands
show voice jitterbuffer
display voice jitterbuffer
stats voice jitterbuffer