Filter
Top Products
3 Configuration commands SIP commands
NN47928-107 125
sip gateway settings
Use this command to configure a SIP FxO gateway on the LAN side of the
BSGX4e to provide the ability to call over the PSTN. An optional domain
name can also be provided.
Note: Before the gateway is configured, the SIP session controller must be
configured, and the gateway settings for the Local Call Routing must be
configured. See sip sc settings on page 126
and lcr settings on page 63
more information.
Syntax config sip gateway settings [domain <domainname>] ip <ip
address> port <number|range>
Parameters domain fqdn Enter an optional domain name for the SIP
gateway.
ip ip address
Enter an IP address for the SIP gateway.
port number Enter the signaling RX port for the SIP gateway.
The default is 5060.
Example > config sip gateway settings ip 192.168.1.1 port 5060
Related
commands
display sip gateway settings
show sip gateway settings
show sip sc settings
show lcr setting