Filter
Top Products
3 Configuration commands SIP commands
NN47928-107 127
contpass yes|no Enable/disable unknown content types to be
relayed. The default is yes.
switchtype BROADSOFT|NORTEL_CS2K|SIEMENS|SYLANTRO|OTHER
BSGX4e interoperates with various softswitches that
offer multi-line (forking) capabilities. These switches
require special handling by the session controller.
Selecting a vendor here instructs the session
controller to format call ID codes to operate with the
switch multi-line feature. This version of BSGX4e
supports the following softswitches:
Broadsoft
Sylantro
Nortel CS2K (selected LG-Nortel phone models 6812
and 6830)
Future versions may support Siemens and Other
(manual configuration) interoperability. In this
release, forking is disabled by default when either of
these is selected.
forkingenable yes|no
This parameter enables/disables SIP forking support.
Sylantro is the only switch that requires this
parameter to be enabled. If you selected Sylantro in
the Switch Type field, set this field to enabled (yes).
For all other vendors switches, set this field to
disabled (no).
Example > config sip sc settings server Sylantro_Automatic wanrxport
5060 lanrxport 5060 sigqos VoIP contpass yes
Related
commands
display sip sc settings
show sip sc settings
show sip sc calls
show sip sc endpoints
clear sip sc calls
stats sip sc calls
clear sip sc status
stats sip sc status
show sip server settings
show qos group