Filter
Top Products
3 Configuration commands DHCP server command
NN47928-107 37
dhcps vendorclass
Use this command to configure the options according to the vendor class
identifier sent by a client. The vendor class can be refined by giving an
interface; in this case the options are only applied if both the vendor class
identifier and interface match the incoming DHCP request.
Syntax config dhcps vendorclass <id> vendorclass <id> interface
[eth0|eth1|none] optiongroup <name>
Parameters id Enter a unique identification for this
vendorclass. Enter new for the next sequential
ID to be automatically assigned or assign an ID
by entering a number. Enter show dhcps
vendorclass to view all assigned IDs.
vendorclass id Enter the vendor class reported by the client.
interface eth0|eth1|none
Specify the interface.
optiongroup name Enter the name of a group of options to be sent
to the client with its IP address. This name is
specified in dhcps option
.
Example > config dhcps vendorclass new Interface eth1 OptionGroup 1
Related
commands
display dhcps vendorclass
del dhcps vendorclass
show dhcps vendorclass
show dhcps group
show dhcps option