Filter
Top Products
3 Configuration commands PMON commands
NN47928-107 83
pmon trace
Use this command to configure monitor traces. All protocol monitoring
traces are synchronized. This allows easy comparison of the traffic types
received over a given period of time.
Syntax config pmon trace <tracename> sourceport [port] destport
[port] srcip <ip address> dstip <ip address> tos <value>
vlanid <value> ipproto [any|udp|tcp|icmp|esp|gre] srcmac <mac
address> dstmac <mac address> interface <if>
Parameters tracename tracename Enter the name of the trace to add or change.
sourceport port Enter the source port to monitor.
destport port Enter the destination port to monitor.
srcip ip address Enter the source IP address to monitor.
dstip ip address Enter the destination IP address to monitor.
tos value Enter the ToS tag value to monitor.
vlanid value Enter the VLAN ID value to monitor.
ipproto any|udp|tcp|icmp|esp|gre
Enter the IP protocol to monitor.
srcmac mac address Enter the source MAC address to monitor.
dstmac mac address Enter the destination MAC address to monitor.
interface if Enter the interface to monitor.
Example > config pmon trace VoIP srcip 10.0.1.100 tos 248
Related
commands
clear pmon trace
display pmon trace
del pmon trace
show pmon trace
stats pmon trace