Filter
Top Products
3 Configuration commands Switch commands
NN47928-107 147
switch qos port
This command maps port numbers to priority queues. This command is
valid only if port is selected as the layer 2 QoS type. See switch qos setting
on page 148 for more information on selecting a layer 2 QoS type.
Syntax config switch qos port <value> priority
[lowestq|lowq|highq|highestq]
Parameters port value Enter the specific port number to map to a
priority queue. Valid range is 1-4. Entering
range of ports is not valid.
priority lowestq|lowq|highq|highestq
Enter the priority queue.
Example > config switch qos port 1 priority highestq
Related
commands
display switch qos port
show switch qos port
show switch qos settings