Filter
Top Products
System commands 3 Configuration commands
164 NN47928-107
system watchdog
Use this command to configure the watchdog timer. The watchdog reset
timer allows the BSGX4e to automatically restart after a software failure.
Such a failure can disrupt normal traffic flow through the BSGX4e. The
automatic reset allows restoring the BSGX4e to normal operation.
Note: It is recommended that the initial watchdog configuration remain
unchanged. The initial configuration enables the reset timer and sets its
value to 7 seconds.
Syntax config system watchdog
enabled [yes|no] refresh <seconds>
Parameters enabled yes|no Enable/disable the watchdog timer.
refresh seconds Enter the refresh interval for the timer in
seconds. Default is
7.
Example > config system watchdog enabled yes refresh 5
Related
commands
display system watchdog
show system watchdog