Filter
Top Products
3 Configuration commands Voice Commands
NN47928-107 175
voice fxo gain
This command sets the DSP gain values for the FXO port(s).
Syntax config voice fxo gain tx <value> rx <value>
Parameters tx value Enter the transmit (tx) gain (digital to analog
conversion) in decibels. Specify a minus (-)
before a negative value. The default is -0 dB.
rx value Enter the receive (rx) gain (analog to digital
conversion) in decibels. Specify a minus (-)
before a negative value. The default is 0 dB.
Example > config voice fxo gain tx -6 rx -6
Related
commands
show voice fxo gain
display voice fxo gain