Filter
Top Products
Installation 29
English
you do not answer the telephone and someone tries to send you a fax
message, your machine will not accept it.
Telephone/Fax Auto Switch Mode [T/F]:
When incoming calls are a
mixture of fax and telephone calls, your best choice is the Telephone/Fax
Auto SW mode. In this mode, your fax machine detects whether the
incoming call is a fax or voice call. When the call is from another fax
machine, your machine will switch to fax mode and receive the message.
When the call is a voice call, your fax machine will ring like a telephone.
If you do not answer, your fax machine will switch back to fax mode to
allow the calling party to manually send a fax.
Telephone Answering Device Mode [TAD]:
Use this mode if you have
connected an answering machine to your fax machine. When a call is
received and is not answered, your answering machine activates and is
ready to send out your recorded outgoing message. At the same time, your
fax machine monitors the incoming call to check if the call is a fax or voice
call. If the incoming call is a fax call, your fax machine will receive the fax
and no voice message will be recorded on your answering machine. If teh
incoming call is a voice call, then your faqx machine will not activate and
the calling party will be able to leave a voice message on your answering
machine.
Note:
In some countries, the Telephone Answering Device
mode is normally turned off. To have it turned on,
contact your dealer.
Memory Reception Mode [MEM]:
Use this answering mode if you want
incoming faxes to be stored in the memory of your fax machine and not
immediately printed. You can then use the print function to print out any
messages that have been stored in memory.
Fax Forwarding Mode [FWD]:
When set to this mode, your fax
machine receives all fax messages into memory, and then automatically
re-sends the fax messages to the forwarding number programmed into
your fax machine. For information on setting the forwarding number, refer
to Setting Forwarding Number in Installation.
PC Interface Mode [PC]:
If you have purchased the optional PC
Interface Board for your fax machine, this mode turns on the connection
between your fax machine and a personal computer. Refer to the
documentation you received with your PC Interface Board option for
details.