Filter
Top Products
70 User’s Guide
Note:
Some settings are not available in some countries. If
you have trouble accessing a dial parameter setting
listed here, contact your dealer for assistance.
Dial parameter settings list
REDIAL TRIES:
This function controls how many times your fax
machine automatically redials a number which is busy or which does not
answer. Available settings are from 0 to 10 tries.
REDIAL INTERVAL:
The function controls how long your fax machine
waits between each automatic redial attempt. Available settings are from
1 to 6 minutes.
DIAL TONE DETECT:
This function allows your fax machine to wait
for and detect a dial tone before proceeding with dialling. Available
settings are on and off.
BUSY TONE DETECT:
This function allows your fax machine to detect
a busy tone when sending a fax. Available settings are on and off.
MF(TONE)/DP(PULSE):
This function controls what method your fax
machine uses for dialling. Two dialling methods are in common use. DP,
or dial pulse dialling, uses monotone pulses to dial a number (like a rotary
telephone). MF, or multi-frequency dialling (touch tone), uses different
tones to dial a number. Available settings are MF and DP.
PULSE DIAL RATE:
If your fax machine is set to pulse dialling, this
function controls how quickly your fax machine sends our dialling pulses
(the dial pulse rate varies in different countries). Available settings are 10
pps, 16 pps and 20 pps.
PULSE MAKE RATIO:
Available settings are 33% and 39%.
PULSE DIAL TYPE:
If your fax machine is set to pulse dialling, this
function controls the type of pulse dialling used (different types of pulse
dialling are used in different countries). Available settings are N, 10-N and
N+1.
MF(TONE) DURATION:
If your fax machine is set to tone dialling, this
function controls the duration of the tones used for dialling (the tone
duration varies in different countries). Available settings are 75 ms, 85 ms,
and 100 ms.
PBX LINE:
Turn this function on if your fax machine is connected to a
PBX. Once this function has been turned on and the dial prefix function
has been programmed, your fax machine will recognize the dial prefix