Filter
Top Products
Programming 71
English
number you use in your PBX to get an outside line. After it dials your dial
prefix number, your fax machine pauses to wait for an outside line before
dialling the rest of the telephone number. Available settings are on and off.
See Connecting to a PBX in Installation for instructions on changing this
setting.
FLASH/EARTH/NORMAL:
If your fax machine is connected to a PBX,
this function tells your fax machine about the type of PBX line your fax
machine if connected to. Available settings are normal (N), flash (F) and
earth (E).
AUTO START:
When this function is turned on, your fax machine will
automatically begin dialling as soon as you have selected a location by
pressing a One Touch key or entering an Auto Dial code. You do not have
to press the Start key. Available settings are on and off.
DIAL PREFIX:
If your fax machine is connected to a PBX, use this
function to tell your fax machine what access number is used to obtain an
outside line from your PBX. You can enter up to 4 digits. See Connecting
to a PBX in Installation for instructions on changing this setting.
IT2 DETECT:
This is another type of dial tone detection (France only).
Available settings are on and off.
Changing dial parameter settings
1. Press the Select Function key.
2. Press the 9/User Program One Touch key. The display shows:
1:FUNC. PROGRAMMING.
3. On the numeric keypad, press 2. The display shows 2:DIAL
PARAMETER.
4. Press the YES key until the display shows the dial parameter you
want to change.
5. Repeatedly press the NO key until the setting you want appears in
the display.
6. Press the YES key to confirm your selection. The name of the next
dial parameter setting will appear in the display.
7. Press the Select Function key to finish.