Filter
Top Products
Installation 33
English
Setting language
Your fax machine comes with two languages installed, which appear on
the display and in reports. Follow the instructions below to switch
languages.
Note:
Your dealer may be able to provide you with
additional languages.
1. Press the Select Function key.
2. Press the 9/User Program One Touch key. The display shows
1:FUNC. PROGRAMMING.
3. Press the YES key. The display shows FUNCTION NO. [ ].
4. Using the numeric keypad, enter 15. The display shows 15:USER
LANGUAGE.
5. Press the NO key to switch to the other installed language.
6. To accept the language change, press the YES key.
7. Press the Select Function key to finish.
Connecting to a PBX
A PBX (Private Branch Exchange) is a private telephone system used to
route internal calls. If you have to dial a prefix (access) number to get an
outside line, then your line is connected to a PBX.
If you are connecting your fax machine to a PBX, follow the instructions
below. These setting changes allow your fax machine to identify the
numbers of the prefix digits required to dial an outside line on your PBX.
After it dials the prefix digits, your fax machine will wait until it sees that
the outside line is available before dialling the rest of the number.
Note:
In some countries you may require service assistance
to make these changes. Also, some PBX installations
may require additional adjustments to your fax
machine. If you continue to have difficulty with fax
communication after following these steps, contact
your dealer.
1. Press the Select Function key.