Filter
Top Products
35
Switch 3 is set to any number not used by another Special I/O Unit. Switch 4
does not need to be set. Switch 5 is set to the right to designate no optical
links in the System. Switch 6, the termination resistance, is turned ON (to the
left). The other switches are set as shown below.
03
Unit 3
SW2SW1
DIP Switch
ON
12345678
Multilevel, level 0
64 I/O
refresh bits
SW1
Not used, turn OFF
Normal Allocation
The transmission line selector is set to the bottom position (no optical links).
The DIP switches are set as follows:
Front-panel DIP Switch
ON
12345678
64 transfer LR bits
Unit 0
SW1
Back-panel DIP Switch
ON
1234
SW3
Multilevel System, level 1
Display pattern A
Termination resistance ON
The transmission line selector is set to the bottom position (no optical links).
The DIP switches are set as follows:
Front-panel DIP Switch
ON
12345678
Setting not necessary
Unit 1
SW1
Unit 3, Level 0
C200H-LK401
Unit 0, Level 1
C500-LK009-V1
Unit 1, Level 1
C500-LK009-V1
Switch Setting Example Section 4-3