Filter
Top Products
Administration Tab
(.. /continued)
IP settings:
(See Figure 15)
These controls are used to assign the TRIMAR AP with its custom IP
addressing scheme.
IP Addressing Mode: Static – select this control if a static/fixed IP
address is to be used.
DHCP – select this control if the IP address is
to be assigned by an external DHCP server.
Default IP address: Use this field to enter a valid IP address.
Default subnet mask: Use this field to enter a valid subnet mask.
Default gateway: Use this field to enter the default gateway
(router IP address) for the subnet on which the
TRIMAR is located.
Factory Defaults:
IP address: 169.254.1.240
Subnet mask: 255.255.0.0
Default gateway: 169.254.1.1
Figure 15: IP settings
Security:
(See Figure 16)
These controls are used to set the account name and password used to
access the web-based administration utility. If these are changed, these
should be properly documented as the only way to re-access a unit’s
administrative controls should the password be lost is to perform a hard
reset on the unit which may be extremely difficult if the radio is located in
a hard to access location.
Factory Defaults:
User name: admin
Password: public
Figure 16: Security
PEGASUS WIRELESS CORPORATION TRIMAR TECHNICAL MANUAL Version 1.0 Page 13 of 32