Filter
Top Products
SSID Admin Tab
(.. /continued)
802.1X configuration
(See Figure 23)
If WPA is used in conjunction with a RADIUS Server, these controls are
used to activate this service. The TRIMAR AP can support two RADIUS
servers. The first RADIUS server entered is the “preferred” server, and
the second RADIUS server entered is the “backup” server that will be
accessed if, for whatever reason, the first server cannot be located.
Authentication Timeout: By default the 802.1X service will re-
authenticate an associated station
once every 60 minutes.
RADIUS Server IP address: The IP address of the Radius Server.
RADIUS Server Port number: The port used by the 802.1X service.
RADIUS Server shared secret: For enhanced security purposes the
shared secret password should not
be a word found in a dictionary and
be at least 16 characters long.
MAC Address Authentication: Check this box if the 802.1X
authentication service requires MAC
address verification of associating
stations.
Figure 23: 802.1X configuration
PEGASUS WIRELESS CORPORATION TRIMAR TECHNICAL MANUAL Version 1.0 Page 21 of 32