Filter
Top Products
56
SD Memory Card Security Function
setting of [SD Setting Method] in [Security] menu after completing the SD Card
Setup. (Î page 84)
6 Make the settings according to the case to be used.
z To use when starting the computer
An SD memory card will be registered with the computer. (Up to two cards can be
registered.)
A Add the check mark for [Use when starting computer] (B) and select [Next].
B Select [Restart the computer after entering settings], then select [Finish].
C Enter the Supervisor Password.
z If the Supervisor Password has been set
Enter the Supervisor Password, then select [OK].
z If the Supervisor Password has not been set
Follow the on-screen instructions to set the Supervisor Password.
Enter the Supervisor Password, then press
Tab
.
Reenter the Supervisor Password for confirmation, then select [OK].
Select [Yes] on the confirmation screen.
[Supervisor Password] and [Password on boot] will be set to enable.
z To use when logging on to Windows
The Windows logon user name and password set in [Control Panel] are registered
in the SD memory card.
After making this setting, the following functions will be disabled.
z Displaying the Welcome screen
z The Fast User Switching function
z Remote desktop connection
A Add the check mark for [Use when logging on to Windows] (C) and select
[Next].
B Select [Restart the computer after entering settings], then select [Finish].
C Set the Windows logon user name and password.
Enter the user name, then press
Tab
.
Enter the password, then press
Tab
.