Filter
Top Products
86
Setup Utility
*1
The following drive can be used for startup (recommended).
Panasonic USB floppy disk drive : CF-VFDU03 (optional)
Panasonic CD drive : CF-VDRRT1M or CF-VDRRT2W (optional)
*2
This is not displayed when [LAN] or [Boot up from LAN] is set to [Disable] on [Advanced] menu.
The default order is as follows:
[Floppy Drive] -> [Hard Disk Drive] -> [USBCD/DVD Drive] -> [LAN].
To move a device up by one in the order, select the device with Ï
and Ð, and then press
F6
.
To move a device down by one in the order, select the device with Ï
and Ð, and then press
F5
.
NOTE
z [Boot] menu cannot be changed when the Setup Utility is started up with the User
Password.
z Boot Menu
The device for starting up the operating system can also be selected during computer
start-up. After the computer is turned on, and
Esc
is pressed at [Panasonic] boot
screen, [Boot Menu] (the device selection screen) will appear. When the setting of
[Boot] menu is changed, the selection screen display will also change. [Boot Menu] is
displayed only when [Boot First Menu] in [Security] menu is set to [Enable].
Boot Menu
Floppy Drive
*1
Hard Disk Drive
USB CD/DVD Drive
*1
LAN
*2