Filter
Top Products
58
SD Memory Card Security Function
• If an SD memory card is already inserted when resuming from the standby or
hibernation mode, or while the screensaver is active, reinsert it.
When resuming from the standby or hibernation mode, or while the screensaver is
active
z If [Set and eject] was selected as the setting method:
Insert the SD memory card, then eject if after you hear a beep indicating card recognition.
(When the speaker function is disabled, e.g., by the key combination
Fn
+
F4
, there will be
no beep sound.)
Change the Settings
After you run the SD Card Setup program once, the setup screen that appears the next time
you run it will be different.
1 Start the SD card setup program.(Î page 55 Step1-3)
The current settings will be displayed.
2 Change the settings.
A. Setting for this computer
You can change the settings registered in this computer.
z [Use the SD card when starting the computer]
This setting can also be changed on [Security] menu of the Setup Utility.
• If you add the check mark
An SD memory card can be used when starting the computer.
• If you remove the check mark
All SD memory cards currently registered on this computer will no longer
be usable when starting this computer. Remove the check mark if there is
a possibility of unauthorized card use by another party (e.g., if you lose an
SD memory card).
To use the SD memory card again, add the check mark for [Use when
starting the computer] under [Setting for this SD card]. It will be registered
with the computer again.
z [Use the SD card when logging on to Windows]
• If you add the check mark
The SD memory card can be used when logging on to Windows.