Filter
Top Products
73
LAN
• When the AC adaptor and battery pack are removed from the computer or
reattached to the computer.
z After operations are resumed from standby mode, the screen remains dark. The
former screen display will be restored when the keyboard, touch pad, or touchscreen
is touched.
z The computer may start up if accessed by another computer on the network.
The following procedure can be used to prevent startup due to unintentional access
by a computer.
A Select [start] - [Control Panel] - [Performance and Maintenance] - [System] -
[Hardware] - [Device Manager] - [Network adapters].
B Select the internal network adaptor, and then select [Power Management].
C Add the check mark for [Only allow management stations to bring the computer
out of standby], then select [OK].